基于 LQR 的联合收割机割台高度控制研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TP273;S24

基金项目:

“十三五”国家重点研发计划(2019YFB131230201)、镇江市重点研发计划(NY2020006)、江苏省现代农机装备与技术示范推广项目(NJ202164,NJ202059)、江苏高校优势学科建设工程项目资助


Research on the header height control strategy of combine harvester based on LQR
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对联合收割机作业过程中田间路面起伏影响割台高度进而导致割台高度测量难和喂入量波动等问题,提出基于双惯 性传感器的联合收割机割台高度实时获取方法和基于线性二次调节器( linear quadratic regulator, LQR)的割台高度控制方法。 通过两个惯性传感器分别测量联合收割机车身和倾斜输送器倾角实时求得割台高度,基于运动学和割台结构分析建立割台系 统数学模型,通过选择性能函数求解线性二次型最优控制问题,得到割台高度控制的最优解,并根据最优解控制液压缸调节割 台高度,使割台高度稳定在预设范围内。 仿真结果表明,传统 PID 控制器跟踪含有随机噪声的阶跃信号时误差均方根为 0. 226°,而 LQR 控制器跟踪含有随机噪声的阶跃信号时误差均方根为 0. 133°,因此 LQR 控制器的动态性能优于传统 PID,可以 提高割台高度的调控质量。

    Abstract:

    Aiming at the problems that the fluctuation of field road affects header height of a combine harvester, it further results in the difficulty of measuring the header height and the fluctuation of feed quantity during the operation of a combine harvester, a real-time method for measuring the header height based on double inertial sensors and a method for controlling the header’s height based on linear quadratic regulator (LQR) were proposed. The header height was obtained in real time by measuring the inclination angles of the combine body and the inclined conveyor with two inertial sensors. Mathematical model of the header system was established based on the kinematics and the structural analysis of the header. The optimal solution of the header height control was obtained by selecting the performance function to solve the linear quadratic optimal control problem. According to the obtained optimal solution, the hydraulic cylinder was controlled to adjust the header height, so that the header height was stable in the preset range. The simulation results showed that the root mean square error of traditional PID controller was 0. 226° when tracking the step signal with random noise, while the root mean square error of the LQR controller was 0. 133° when tracking the step signal with random noise. Therefore, the dynamic performance of the LQR controller is better than that of the traditional PID, confirming that the proposed method can improve the control quality of header height of a combine harvester.

    参考文献
    相似文献
    引证文献
引用本文

刘青山,李 川,魏新华,卢泽民,王爱臣.基于 LQR 的联合收割机割台高度控制研究[J].电子测量与仪器学报,2022,36(4):65-72

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2023-03-06
  • 出版日期: