基于 MPC 的爆胎车辆轨迹控制研究
DOI:
CSTR:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TP273; U461. 91

基金项目:


Research on trajectory control of tire burst vehicle based on MPC
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对爆胎车辆偏航问题,提出基于模型预测控制(model predictive control,MPC)的前轮转向控制器来对汽车偏航进行矫 正,保证车辆在安全路径上行驶。 基于 MPC,选取简化的双轨道车辆模型,用微分方程描述车辆运动状态,线性离散化,推导预 测方程,考虑车辆稳定性因素,将其添加为约束条件,转化为标准二次型计算最优解,构造闭环系统进行仿真,结果表明,基于 MPC 设计的前轮主动转向控制系统在直线行驶和双移线行驶两种驾驶工况下能让车辆保持稳定行驶,有效的控制爆胎车辆行 驶轨迹,质心侧偏角、轮胎侧偏角和横摆角速度均在稳定性要求之内,保证车辆在安全路径范围内行驶,达到爆胎车辆轨迹控制 效果。

    Abstract:

    Aiming at the yaw problem of the flat tire vehicle, the model predictive control (MPC) based front wheel steering controller is proposed to correct the vehicle yaw and ensure the vehicle to run on the safe path. Based on the model predictive control, the simplified double track vehicle model is selected, and the vehicle motion state is described by differential equation. The prediction equation is derived by linear discretization. Considering the vehicle stability factor, it is added as a constraint condition and transformed into the standard quadratic form to calculate the optimal solution. The closed-loop system is constructed for simulation. The results show that the MPC based design has good performance: The front wheel active steering controller can keep the vehicle running stably under two driving conditions of straight driving and double shifting driving, and effectively control the running track of the flat tire vehicle. The center of mass side slip angle, tire side slip angle and yaw angle speed are all within the stability requirements, so as to ensure the vehicle to drive in the safe path and achieve the trajectory control effect of the tire burst vehicle.

    参考文献
    相似文献
    引证文献
引用本文

夏勇生,吴东升,平兰兰.基于 MPC 的爆胎车辆轨迹控制研究[J].电子测量与仪器学报,2021,35(6):154-160

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2023-02-27
  • 出版日期:
文章二维码