李唐安,郑楚君,孙清雯,崔大祥,王 侃.线圈型磁通量传感器多路复用结构优化研究[J].电子测量与仪器学报,2023,37(11):14-23
线圈型磁通量传感器多路复用结构优化研究
Research on multiplexing structure optimization of coil-type magnetic flux sensor
  
DOI:
中文关键词:  磁通量  定量检测  POCT  有限元仿真分析  多路同步检测
英文关键词:magnetic flux  quantitative detection  POCT  finite element simulation analysis  multiple synchronous detection
基金项目:国家自然科学基金委员会国际合作与交流项目( 82020108017)、中国国家自然科学基金(32171373,82272821, 81903169)项目资助
作者单位
李唐安 1. 上海交通大学电子信息与电气工程学院,2. 上海交通大学中国科学院 薄膜与微细加工技术重点实验室 
郑楚君 1. 上海交通大学电子信息与电气工程学院,2. 上海交通大学中国科学院 薄膜与微细加工技术重点实验室 
孙清雯 1. 上海交通大学电子信息与电气工程学院,2. 上海交通大学中国科学院 薄膜与微细加工技术重点实验室 
崔大祥 1. 上海交通大学电子信息与电气工程学院,2. 上海交通大学中国科学院 薄膜与微细加工技术重点实验室 
王 侃 1. 上海交通大学电子信息与电气工程学院,2. 上海交通大学中国科学院 薄膜与微细加工技术重点实验室 
AuthorInstitution
Li Tang′an 1. School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University,2. Key Laboratory of Thin Film and Microfabrication Technology (Ministry of Education),Shanghai Jiao Tong University, 
Zheng Chujun 1. School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University,2. Key Laboratory of Thin Film and Microfabrication Technology (Ministry of Education),Shanghai Jiao Tong University, 
Sun Qingwen 1. School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University,2. Key Laboratory of Thin Film and Microfabrication Technology (Ministry of Education),Shanghai Jiao Tong University, 
Cui Daxiang 1. School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University,2. Key Laboratory of Thin Film and Microfabrication Technology (Ministry of Education),Shanghai Jiao Tong University, 
Wang Kan 1. School of Electronic Information and Electrical Engineering, Shanghai Jiao Tong University,2. Key Laboratory of Thin Film and Microfabrication Technology (Ministry of Education),Shanghai Jiao Tong University, 
摘要点击次数: 427
全文下载次数: 381
中文摘要:
      线圈型磁通量检测技术已大量应用于临床诊断应用中,但相邻磁检测信号容易出现信号混叠现象。 现有研究大多采用 算法处理和样本空间隔离的方式避免信号的相互干扰,限制了该技术在体外快速诊断领域中的发展。 针对上述问题,本研究采 用数学物理建模结合有限元仿真的形式分析了线圈型磁通量传感器的结构,并进行了传感器结构优化。 最终实验结果表明,优 化后的传感器能有效地区分间距为 4 mm 的相邻磁信号源。 针对临床样本胃泌素 17 的免疫层析定量检测中,检测范围达到 11 pg / mL~ 110 ng / mL。 上述结果证实了优化后传感器结构具备多路同步复用检测能力。
英文摘要:
      Coil-type magnetic flux detection technology has been widely used in clinical diagnosis applications. However, adjacent magnetic samples’ detection signals are prone to aliasing. Most of the existing researches used algorithm processing and sample space isolation to avoid the mutual interference of signals, which limits the development of this technology in the field of point-of-care testing. In view of the above problems, this study uses mathematical physical modeling combined with finite element simulation to analyze the structure of the coil-type magnetic flux sensor, and optimizes the sensor structure. The final experimental results show that the optimized sensor can effectively distinguish the adjacent magnetic signal sources with a distance of 4 mm. In the immunochromatographic quantitative detection of gastrin-17 in clinical samples, the detection range reached 11 pg / mL ~ 110 ng / mL. The above result confirm that the optimized sensor structure has the capability of multiplex synchronous multiplexing detection.
查看全文  查看/发表评论  下载PDF阅读器