| 董海迪,马瑞萍,王学进,刘刚.容差条件下的模拟电路多故障诊断[J].电子测量与仪器学报,2017,31(11):1815-1820 |
| 容差条件下的模拟电路多故障诊断 |
| Multiple fault diagnosis of analog circuit under tolerance |
| |
| DOI：10.13382/j.jemi.2017.11.018 |
| 中文关键词: 模拟电路 容差 多故障 线性规划 |
| 英文关键词:analog circuit tolerance multiple fault linear programming |
| 基金项目:国家杰出青年基金(61025014)、国家自然科学基金(61403399)资助项目 |
|
|
| Author | Institution |
| Dong Haidi | Department of Space Engineering, Rocket Force University of Engineering, Xi’an 710025, China |
| Ma Ruiping | Naval Academy of Armament, Beijing 100161, China |
| Wang Xuejin | Naval Academy of Armament, Beijing 100161, China |
| Liu Gang | Department of Space Engineering, Rocket Force University of Engineering, Xi’an 710025, China |
|
| 摘要点击次数: 2734 |
| 全文下载次数: 2661 |
| 中文摘要: |
| 针对容差模拟电路多故障诊断问题，提出了包括故障状态检测、故障粗糙集生成和故障元件定位的分步诊断方法。将有限测点的故障状态检测转化为容差约束下的线性规划问题；推导得到故障特征等式并生成故障粗糙集，证明了在容差条件下的故障特征等式中可选用标称参数电路的节点电压；对故障粗糙集中元件参数的偏差限值进行修正，对修正后的电路进行状态检测，实现故障元件定位，并估算故障参数偏差。仿真实例表明，该方法具有较高的诊断准确度和参数辨识精度。 |
| 英文摘要: |
| A novel method consisting of fault detection, rough set generation, element isolation and parameter estimation is presented for multiple fault diagnosis on analog circuit under tolerance. Firstly, a linear programming concept is developed to transform the fault detection of circuit with limited accessible terminals for measurement to check existence of a feasible solution under tolerance constraints. Secondly, the fault characteristic equation is deduced to generate a fault rough set. It is proved that the node voltage of nominal circuit can be used in fault characteristic equation under tolerance. Finally, fault detection of circuit with revised deviation restriction for suspected fault components is proceeded to locate faulty elements and estimate their parameters. The diagnosis accuracy and parameter identification precision of the method are verified by simulation results. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
|
|
|
