电子测量与仪器学报

张安安,周志通,曲广龙,杨超,庄景泰.基于HHT一化迭代的输电线路故障测距研究[J].电子测量与仪器学报,2021,35(3):165-172

基于HHT一化迭代的输电线路故障测距研究

Study on fault location of transmission line based on HHT iteration

DOI：

英文关键词:fault location instantaneous amplitude HHT one iteration transmission line high frequency current fault signal

基金项目:国家重点研发计划(2017YFE0112600-002)项目资助

作者	单位
张安安	1.西南石油大学电气信息学院成都610500；
周志通	1.西南石油大学电气信息学院成都610500； 2.大唐水电科学技术研究院有限公司成都610074
曲广龙	1.西南石油大学电气信息学院成都610500；
杨超	1.西南石油大学电气信息学院成都610500；
庄景泰	1.西南石油大学电气信息学院成都610500；

Author	Institution
Zhang Anan	(1.School of Electrical Engineering and Information，Southwest Petroleum University，Chengdu 610500, China；
Zhou Zhitong	1.School of Electrical Engineering and Information，Southwest Petroleum University，Chengdu 610500, China；2.Datang Hydropower Science & Technology Research Institute Co.,Ltd, Chengdu 610074, China
Qu Guanglong	(1.School of Electrical Engineering and Information，Southwest Petroleum University，Chengdu 610500, China；
Yang Chao	(1.School of Electrical Engineering and Information，Southwest Petroleum University，Chengdu 610500, China；
Zhuang Jingtai	(1.School of Electrical Engineering and Information，Southwest Petroleum University，Chengdu 610500, China；

摘要点击次数: 471

全文下载次数: 977

中文摘要:

针对目前行波测距法中波速测定精度差的不足和波头检测算法存在的缺陷，通过分析行波波速随频率的变化规律，推导出波速稳定时的频率区间范围，从而消除波速对测距结果的影响；在研究高压直流输电线路故障行波到达时刻与行波特定瞬时振幅关系的基础上，分析瞬时振幅影响行波测距的机理，提出一种基于瞬时振幅的输电线路故障测距方法，利用希尔伯特黄变换(HHT)一化迭代的方法形成高频电流故障信号的一化时幅图，依据一化时幅图确定波头时刻与该时刻特定的瞬时振幅，形成高压直流输电线路故障测距算法。MATLAB/Simulink仿真结果表明，该方法的相对误差在03%以内，且该方法与HHT变换的定位方法相比，具有更高定位精度，基本不受故障距离、过渡电阻的影响。

英文摘要:

Aiming at the deficiency of the measurement accuracy of the wave velocity in the current traveling wave ranging method and the defect of the detection algorithm of the wave head, by analyzing the changing law of traveling wave speed with frequency, the frequency range when the wave speed is stable is derived, so as to eliminate the influence of the wave velocity on the ranging result. On the basis of studying the relationship between the arrival time of the traveling wave of the high voltage direct current (HVDC) transmission line fault and the specific instantaneous amplitude of the traveling wave, the mechanism of the instantaneous amplitude affecting the traveling wave location is analyzed, and a fault location method of the transmission line based on the instantaneous amplitude is proposed. The iterative method forms a time amplitude diagram of the high frequency current fault signal. According to the time amplitude diagram, the wave head time and the specific instantaneous amplitude at that time are determined to form a HVDC transmission line fault location algorithm. MATLAB/Simulink simulation results show that the relative error of this method is within 03%, and compared with the positioning method of Hilbert Huang transform, this method has higher positioning accuracy and is basically not affected by fault distance and transition resistance.

查看全文查看/发表评论下载PDF阅读器