电子测量与仪器学报

刘苹,张小平,匡斯建,王静袁,张铸.开关磁阻电机绕组气隙建模及最佳气隙宽度确定方法[J].电子测量与仪器学报,2020,34(4):150-156

开关磁阻电机绕组气隙建模及最佳气隙宽度确定方法

Air gap modeling of SRM winding and determination of optimal air gap width

DOI：

英文关键词:SRM temperature field analysis winding air gap modeling method

基金项目:长株潭国家自主创新示范区专项(2017XK2303)、湘潭市科技专项(CXY-ZD20172001)资助

作者	单位
刘苹	1. 湖南科技大学海洋矿产资源探采装备与安全技术国家地方联合工程实验室，2. 湖南科技大学信息与电气工程学院
张小平	1. 湖南科技大学海洋矿产资源探采装备与安全技术国家地方联合工程实验室，2. 湖南科技大学信息与电气工程学院
匡斯建	1. 湖南科技大学海洋矿产资源探采装备与安全技术国家地方联合工程实验室，2. 湖南科技大学信息与电气工程学院
王静袁	1. 湖南科技大学海洋矿产资源探采装备与安全技术国家地方联合工程实验室，2. 湖南科技大学信息与电气工程学院
张铸	2. 湖南科技大学信息与电气工程学院

Author	Institution
Liu Ping	1. National-Local Joint Engineering Laboratory of Marine Mineral Resources Exploration Equipment and Safety Technology, Hunan University of Science and Technology，2. College of Information and Electrical Engineering, Hunan University of Science and Technology
Zhang Xiaoping	1. National-Local Joint Engineering Laboratory of Marine Mineral Resources Exploration Equipment and Safety Technology, Hunan University of Science and Technology，2. College of Information and Electrical Engineering, Hunan University of Science and Technology
Kuang Sijian	1. National-Local Joint Engineering Laboratory of Marine Mineral Resources Exploration Equipment and Safety Technology, Hunan University of Science and Technology，2. College of Information and Electrical Engineering, Hunan University of Science and Technology
Wang Jingyuan	1. National-Local Joint Engineering Laboratory of Marine Mineral Resources Exploration Equipment and Safety Technology, Hunan University of Science and Technology，2. College of Information and Electrical Engineering, Hunan University of Science and Technology
Zhang Zhu	2. College of Information and Electrical Engineering, Hunan University of Science and Technology

摘要点击次数: 342

全文下载次数: 416

中文摘要:

针对开关磁阻电机定子槽内双绕组间因存在不规则气隙而导致其温度场分析建模困难的问题,提出一种双绕组气隙的改进建模方法。分析了电机双绕组间气隙总截面积的计算方法,研究了双绕组气隙的模型结构与最佳气隙宽度的确定方法,在此基础上建立了开关磁阻电机的三维有限元模型,并采用有限元法对其温度场进行了分析,得到开关磁阻电机的温度场分布, 通过对不同气隙宽度下的温度场分析并采用数值拟合方法得到其气隙宽度与相应温度间的函数关系,利用该函数关系及相应的实测温度值,即可得到双绕组气隙模型的最佳气隙宽度,该方法因有效提高了开关磁阻电机温度场分析结果的准确性,因而具有较好的应用价值。

英文摘要:

Aiming at the problem that the temperature field analysis modeling is difficult due to the irregular air gap between the two windings in the stator slot of the switched reluctance motor, an improved modeling method for the double winding air gap is proposed. The calculation method of the total cross-sectional area of the air gap between the two windings of the motor is analyzed. The model structure of the double-winding air gap and the method for determining the optimal air gap width are studied. Based on this, a threedimensional finite element model of the switched reluctance motor is established. The temperature field is analyzed by finite element method, and the temperature field distribution of the switched reluctance motor is obtained. The temperature field under different air gap width is analyzed and the numerical fitting method is used to obtain the air gap width and the corresponding temperature. The function relationship, using the function relationship and the corresponding measured temperature value, can obtain the optimal air gap width of the double-winding air gap model. This method effectively improves the accuracy of the temperature field analysis results of the switched reluctance motor, it has a good application value.

查看全文查看/发表评论下载PDF阅读器